Skip to content
Pallet Racking InspectionGet a quote
Menu
Worker walking beneath orange racking beams in a warehouse

Pallet racking inspection checklist

For the weekly walk your own team does between expert visits. Print it, take it round on a clipboard, and file it with your racking records.

The weekly sheet

One sheet per area, per week. Tick each line, note anything you find with its location, and give it a rating. Anything you rate red gets offloaded before you finish the round.

Site, area and date
Site and area 
Checked by 
Person responsible for racking safety 
Date 
CheckWhat to look forOKFound (aisle, bay, level)
UprightsDents, bends, splits or twisting, especially in the bottom metre where trucks turn. 
BeamsVisible sag under load, bent front faces, cracked welds at the end connectors. 
Beam locksEvery beam end has its safety lock or pin in place. 
BracingDiagonals and horizontals present, straight and tight. 
Base plates and anchorsPlates on the floor, anchor bolts in, no frame lifting or walking. 
Column guards and barriersGuards in place where trucks pass, not cracked or pushed into the upright. 
Load noticesPresent at the end of each run, legible, matching the layout. 
LoadsNothing heavier than the notice allows, no pallets overhanging or sitting crooked on beams. 
PalletsNo broken boards or blocks on pallets stored at height. 
Flue spaces and aislesGaps between back-to-back pallets kept clear; nothing stored in aisles. 
Annual expert inspection
Inspector's name and card number 
Card checked on the issuing body's register (Y/N) 
Date of last report 
Next inspection due 

How to rate what you find

Use the same three colours the expert inspector will use, from HSE's guide (HSG76 Table 11):

Green

Note it. Look again next week.

Amber

Offload, isolate and arrange a repair. Four weeks at most.

Red

Offload now and close the bay until it is repaired.

If you aren't sure whether a dent is amber or red, treat it as red and ask your inspector. Damage limits come from the manufacturer and the standard, and an untrained eye tends to rate too low.

Who should do the weekly check

Someone who knows the warehouse and has had basic racking awareness training, reporting to your person responsible for racking safety. Our post on the weekly racking safety check goes into how to run it, and the post on racking inspection courses covers training.

The weekly check does not replace the annual expert inspection on the pallet racking inspection page. When red or amber items build up, see racking repairs.

Why the weekly check matters

  1. Regulation

    Employers must inspect work equipment exposed to deterioration at suitable intervals (PUWER regulation 6).

  2. Interval

    Weekly visual checks by your own staff, or at a frequency your person responsible for racking safety sets from the risk (HSG76).

  3. Keep

    Your signed weekly sheets and the damage register, kept with the expert's reports (HSG76).

Where this checklist comes from

Need the annual inspection booked?

Four boxes and you are done. We pick an inspection firm that covers your postcode and tell you its name; nothing about you is passed on until you say yes. There is no charge to you.

Pallet Racking Inspection is an independent matching service and does no inspecting itself. Fees, dates and terms are agreed between you and the firm.

Where is the racking?
Get a quote