Skip to content
Pallet Racking InspectionGet a quote
Menu
Blue racking uprights with yellow column guards in an empty warehouse

Racking Protection: Where Guards and Barriers Are Expected

Protection · 21 November 2026 · 2 min read · Pallet Racking Inspection

The answer first

Fit column guards to uprights that face truck traffic, end barriers at aisle ends and at corners, and keep them in good repair. Protection doesn't replace inspection, but it is the cheapest way to shorten the damage list.

Almost all racking damage happens in the bottom metre, where reach trucks and counterbalance forklifts turn into an aisle or line up with a beam. Protection is about putting something cheaper than an upright in the way.

The three kinds of protection

Column guards clip or bolt round the front of an upright. Plastic and steel versions both exist. They take the knock that would otherwise dent the frame leg.

End-of-aisle barriers are low steel rails across the end frame of a run, bolted to the floor. They stop a truck turning in too tight from hitting the end upright at all.

Rack-end frames and corner protectors cover the most exposed corners, where two traffic routes cross.

Where HSE expects them

HSE’s warehousing guide asks for protection where racking is exposed to truck traffic, especially at aisle ends and corners, and for the racking to be fixed to the floor (HSG76). It doesn’t list every location, because that depends on how trucks actually move on your site. Your inspector will note missing guards in the report, and your own weekly walk should spot ones that have been knocked loose.

A useful test: stand at the end of each aisle and look for black tyre marks and scraped paint. Wherever you see them, there should be a guard.

Guards that are doing harm

A guard that has been hit hard can be pushed back into the upright it protects, or hide a dent behind it. When you do the weekly check, look behind guards, not just at them. A bolt-down guard should be fixed to the floor, not to the upright, so a strike doesn’t pass straight into the frame.

Protection and inspections

Guards don’t change how often you need an expert inspection. They change how long the defect list is. Sites that add end barriers and column guards after a bad report usually see far fewer amber and red items the next year, and a smaller racking repairs bill.

If you are about to book the annual pallet racking inspection, ask the inspector to mark on the report where protection is missing. It costs nothing extra and gives you a fitting list. The weekly checklist has a line for guards too.

Sources

Find an inspector near your site

Four boxes and you are done. We pick an inspection firm that covers your postcode and tell you its name; nothing about you is passed on until you say yes. There is no charge to you.

Pallet Racking Inspection is an independent matching service and does no inspecting itself. Fees, dates and terms are agreed between you and the firm.

Where is the racking?
Get a quote